4 Zones Wired Fire Alarm Control Panel

The HM-1004 4 zones wired fire alarm control panel utilizes the conventional input devices, and can be compatible with shunt type device, 2-wire smoke detector, 4-wire smoke detector, emergency push button, and other relay normally open equipment. Its output parts incorporate 4 sound output circuits (Sound1-4), 3 standard A-class replay output circuits (alarm, fault, and monitoring), and 1 EIA-485 output port used for external connection with the remote annunciator or the optional remote relay module.

The 4 zones wired fire alarm control panel can complete the zone setting via the keys, and monitor all the wiring, alternating voltage and battery quantity. Each detection zone allows for independent operation. It can also be disabled. The single detection zone can connect with the detectors no greater than 20 simultaneously. Meanwhile, the alarm sound output of the product can be edited and disabled.

Technical Data
1. AC Power
a. Power Supply: 220V AC, 50Hz, 2.3amps
b. Min. Wire Size: #14 AWG (2.0mm²) with 600V Insulation

2. Battery (Lead Acid Type Only)
a. Max. Charging Circuit: Normal Floating Charge of 27.6V@0.8amp
b. Max. Charging Capacity: 18Ah Battery

3. Sound Output Device Circuit
a. General Alarm Zones: 1-16
b. Operation: Class B for All Detection Zones
c. Normal Operating Voltage: Nominal 24V DC (Max. Ripple of 100mV)
d. Alarm Current: 15mA (Threshold)
e. Short Circuit Current: 42mA (Maximum)
f. Max. Loop Resistance: 100ohms
g. End-of-line Resistor: 4.7K, 0.5 watt
h. Standby Current: 7.26mA
i. Detector Loop Current: Sufficient Enough to Guarantee the Operation of Two Alarm Detectors in One Detection Zone

4. Three Relays Output
Relay Contact Rating: 2.0amps @ 30V DC, 2.0amps @ 30V AC

5. Non Resettable 24V DC Power
a. Max. Ripple Voltage: 10Mvrms
b. Operating Voltage: Nominal 24V
c. Max. Output DC Current: 500mA
d. Recommended Max. Standby Current: 150mA

Related Names
Home Alarm Control Panel | Central Warning Panel | Fire Safety Products