HM-805WP Pet-immunity Wide Angle PIR Detector

The HM-805WP wired pet-immunity wide angle PIR detector can raise alarm when detecting the movement of the human body and the illegal intrusion. Adopting the fire resistant PCB board and the outer shell manufactured from the flame retardant ABS, it is designed with software and hardware dual temperature compensation technology. The product is also resistant to the interference from fluorescent lamp and wind flow.

Due to the artificial intelligent circuit design, the pet-immunity wide angle PIR detector operates with low false alarm rate. It also allows for optional alarm delay time and the function of pet immunity. Through the design for software and hardware electronic circuit, the product can remove all kinds of false alarm. It won't affected by the pet weighing up to 12.5kg. Compliant with CE and CCC certification, it is manufactured with global leading technology, and has a wide application range involving hotel, residential area, office, communication base station, and more.

Operation Instructions
1. Function Jumper Settings
A. Pulse Jumper
Regulating pulse counting can change the sensitivity and the anti-RF interference ability of the pet-immunity wide angle PIR detector.
1&2: Class 1 pulse. The product has rather high detection sensitivity, and good anti-RF interference ability. It is suitable for working in general environment.
2&3: Class 2 pulse. The detection sensitivity is a little low. But the anti-RF interference ability is much stronger. Therefore, the product is applicable for the environment with serious RF interference.

The factory setting of the product is 1&2 and 1P (class 1 pulse).

B. Relay Jumper
The N.O./N.C. select jumper is used for setting the alarm output state. The output state can be chosen in line with the specification requirements of different types of host.
1&2: N.O. (Normally open state)
2&3: N.C. (Normally close state)
Factory Setting: 2&3 N.C.

C. Delay Jumper
It is used for setting the alarm delay time, namely the lasting time of the relay and the alarm indicator when alarming. The alarm delay time can be chosen according to the needs.
1&2: 3s
2&3: 30s
Factory Setting: 1&2 (3s)

D. LED Jumper
It is employed for controlling the LED indicator, which won't affect the normal working of the pet-immunity wide angle PIR detector. For strengthening the concealment of the product, the LED indicator can be turned off after the test by disconnecting the LED jumper.

2. Walk Test
Connect the 12V DC power supply. The LED indicator flashes. The product enters the self-testing state with the self-testing time of 60s or so. When the LED indicator goes out, it shows that the product comes into the normal monitoring state. The tester should walk within the detection zone in parallel with the wall on which the product is mounted. The lightening of the LED indicator means the pet-immunity wide angle PIR detector gets into the alarm state.

Related Names
Electronic IR Sensor | Motion Sensing Device | Commercial Motion Sensor