24.5 Inch Steel Wheel
The 24.5 inch tubeless steel wheel is a large diameter rim matched with the low-profile tire. It exhibits high strength, little bouncing movement, and good dynamic balance.
Compare with other similar wheels, our wheel proves a 20% increase in strength and three to four times the loading capacity of the original steel blank while saving your 20% of raw material with 25% reduced weight.
In addition, we can design the product according to customer requirements. This series of product is in high demand on the North American market where customers are very satisfied with its quality. As the market demand for lightweight wheel continues to increase, we are now researching and developing new wheels with lighter weight and higher strength.
Parameters
| Product Code | Size | Bolt Hole | Central Hole Dia meter (mm) | Thickness(mm) | Hand Hole | Offset (mm) | MaximumLoadand Inflation Pressure | Matched Tire Size | |||||
| Quantity | Diameter(mm) | HoleType | PitchCircle Diameter(mm) | Wheel Type | Rim | Disc | lbs- psi | ||||||
| HSW10A03F01 | 24.5×8.25 | 10 | Φ26 | H1 | Φ285.75 | Hub-Piloted Wheel | Φ221 | 7 | 12 | 2 | 156 12 | 8000-120 | 11R24.5 |
| Notice: The offset refers to the distance between the centerline of the wheel and the plane of the hub-mounting surface of the wheel. | |||||||||||||
| 2. H1 refers to the flange bolt hole. JSR refers to the button head bolt hole at both ends. ISR refers to the button head bolt hole at one end. JSR18 means that the sphere radius is 18mm . | |||||||||||||
Parameters
| Product Code | Size | Bolt Hole | Central Hole Dia meter (mm) | Thickness(mm) | Hand Hole | Offset (mm) | MaximumLoadand Inflation Pressure | Matched Tire Size | |||||
| Quantity | Diameter(mm) | HoleType | PitchCircle Diameter(mm) | Wheel Type | Rim | Disc | lbs- psi | ||||||
| HSW10A03C02 | 24.5×8.25 | 10 | Φ32.5 | JSR22 | Φ285.75 | Stud-Piloted Wheel | Φ221 | 7 | 12 | 2 | 156 12 | 8000-120 | 11R24.5 |
| Notice: The offset refers to the distance between the centerline of the wheel and the plane of the hub-mounting surface of the wheel. | |||||||||||||
| 2. H1 refers to the flange bolt hole. JSR refers to the button head bolt hole at both ends. ISR refers to the button head bolt hole at one end. JSR18 means that the sphere radius is 18mm . | |||||||||||||
Parameters
| Product Code | Size | Bolt Hole | Central Hole Dia meter (mm) | Thickness(mm) | Hand Hole | Offset (mm) | MaximumLoadand Inflation Pressure | Matched Tire Size | |||||
| Quantity | Diameter(mm) | HoleType | PitchCircle Diameter(mm) | Wheel Type | Rim | Disc | lbs- psi | ||||||
| HSW10A03F03 | 24.5×8.25 | 10 | Φ26 | H1 | Φ285.75 | Hub-Piloted Wheel | Φ220 | 6 | 12 | 2 | 156 12 | 7800-120 | 11R24.5 |
| Notice: The offset refers to the distance between the centerline of the wheel and the plane of the hub-mounting surface of the wheel. | |||||||||||||
| 2. H1 refers to the flange bolt hole. JSR refers to the button head bolt hole at both ends. ISR refers to the button head bolt hole at one end. JSR18 means that the sphere radius is 18mm . | |||||||||||||
Parameters
| Product Code | Size | Bolt Hole | Central Hole Dia meter (mm) | Thickness(mm) | Hand Hole | Offset (mm) | MaximumLoadand Inflation Pressure | Matched Tire Size | |||||
| Quantity | Diameter(mm) | HoleType | PitchCircle Diameter(mm) | Wheel Type | Rim | Disc | lbs- psi | ||||||
| HSW10A03F04 | 24.5×8.25 | 10 | Φ26 | H1 | Φ285.75 | Hub-Piloted Wheel | Φ220 | 7 | 14 | 2 | 154 12 | 8500-120 | 11R24.5 |
| Notice: The offset refers to the distance between the centerline of the wheel and the plane of the hub-mounting surface of the wheel. | |||||||||||||
| 2. H1 refers to the flange bolt hole. JSR refers to the button head bolt hole at both ends. ISR refers to the button head bolt hole at one end. JSR18 means that the sphere radius is 18mm . | |||||||||||||
Parameters
| Product Code | Size | Bolt Hole | Central Hole Dia meter (mm) | Thickness(mm) | Hand Hole | Offset (mm) | MaximumLoadand Inflation Pressure | Matched Tire Size | |||||
| Quantity | Diameter(mm) | HoleType | PitchCircle Diameter(mm) | Wheel Type | Rim | Disc | lbs- psi | ||||||
| HSW10A03F05 | 24.5×8.25 | 10 | Φ26 | H1 | Φ285.75 | Hub-Piloted Wheel | Φ220 | 6 | 12 | 5 | 156 12 | 7800-120 | 11R24.5 |
| Notice: The offset refers to the distance between the centerline of the wheel and the plane of the hub-mounting surface of the wheel. | |||||||||||||
| 2. H1 refers to the flange bolt hole. JSR refers to the button head bolt hole at both ends. ISR refers to the button head bolt hole at one end. JSR18 means that the sphere radius is 18mm . | |||||||||||||
Parameters
| Product Code | Size | Bolt Hole | Central Hole Dia meter (mm) | Thickness(mm) | Hand Hole | Offset (mm) | MaximumLoadand Inflation Pressure | Matched Tire Size | |||||
| Quantity | Diameter(mm) | HoleType | PitchCircle Diameter(mm) | Wheel Type | Rim | Disc | lbs- psi | ||||||
| HSW10A03C06 | 24.5×8.25 | 10 | Φ32 | JSR22 | Φ285.75 | Stud-Piloted Wheel | Φ221.5 | 6 | 12 | 2 | 156 12 | 7800-120 | 11R24.5 |
| Notice: The offset refers to the distance between the centerline of the wheel and the plane of the hub-mounting surface of the wheel. | |||||||||||||
| 2. H1 refers to the flange bolt hole. JSR refers to the button head bolt hole at both ends. ISR refers to the button head bolt hole at one end. JSR18 means that the sphere radius is 18mm . | |||||||||||||
Parameters
| Product Code | Size | Bolt Hole | Central Hole Dia meter (mm) | Thickness(mm) | Hand Hole | Offset (mm) | MaximumLoadand Inflation Pressure | Matched Tire Size | |||||
| Quantity | Diameter(mm) | HoleType | PitchCircle Diameter(mm) | Wheel Type | Rim | Disc | lbs- psi | ||||||
| HSW10A03C07 | 24.5×8.25 | 10 | Φ32 | JSR22 | Φ285.75 | Stud-Piloted Wheel | Φ221.5 | 7 | 14 | 2 | 154 14 | 8500-120 | 11R24.5 |
| Notice: The offset refers to the distance between the centerline of the wheel and the plane of the hub-mounting surface of the wheel. | |||||||||||||
| 2. H1 refers to the flange bolt hole. JSR refers to the button head bolt hole at both ends. ISR refers to the button head bolt hole at one end. JSR18 means that the sphere radius is 18mm . | |||||||||||||
Parameters
| Product Code | Size | Bolt Hole | Central Hole Dia meter (mm) | Thickness(mm) | Hand Hole | Offset (mm) | MaximumLoadand Inflation Pressure | Matched Tire Size | |||||
| Quantity | Diameter(mm) | HoleType | PitchCircle Diameter(mm) | Wheel Type | Rim | Disc | lbs- psi | ||||||
| HSW10E10F01 | 24.5×13 | 10 | Φ23.8 | ISR22 | Φ335 | Stud-Piloted Wheel | Φ285.75 | 6 | 16 | 36.8 16 | |||
| Notice: The offset refers to the distance between the centerline of the wheel and the plane of the hub-mounting surface of the wheel. | |||||||||||||
| 2. H1 refers to the flange bolt hole. JSR refers to the button head bolt hole at both ends. ISR refers to the button head bolt hole at one end. JSR18 means that the sphere radius is 18mm . | |||||||||||||
Parameters
| Product Code | Size | Bolt Hole | Central Hole Dia meter (mm) | Thickness(mm) | Hand Hole | Offset (mm) | MaximumLoadand Inflation Pressure | Matched Tire Size | |||||
| Quantity | Diameter(mm) | HoleType | PitchCircle Diameter(mm) | Wheel Type | Rim | Disc | lbs- psi | ||||||
| HSW10E10F02 | 24.5×15 | 10 | Φ23.8 | ISR22 | Φ335 | Stud-Piloted Wheel | Φ285.75 | 6 | 16 | 4.3 16 | |||
| Notice: The offset refers to the distance between the centerline of the wheel and the plane of the hub-mounting surface of the wheel. | |||||||||||||
| 2. H1 refers to the flange bolt hole. JSR refers to the button head bolt hole at both ends. ISR refers to the button head bolt hole at one end. JSR18 means that the sphere radius is 18mm . | |||||||||||||
Parameters
| Product Code | Size | Bolt Hole | Central Hole Dia meter (mm) | Thickness(mm) | Hand Hole | Offset (mm) | MaximumLoadand Inflation Pressure | Matched Tire Size | |||||
| Quantity | Diameter(mm) | HoleType | PitchCircle Diameter(mm) | Wheel Type | Rim | Disc | lbs- psi | ||||||
| HSW10E10C03 | 24.5×15 | 10 | Φ32 | ISR22 | Φ335 | Stud-Piloted Wheel | Φ281 | 6 | 16 | 32 16 | |||
| Notice: The offset refers to the distance between the centerline of the wheel and the plane of the hub-mounting surface of the wheel. | |||||||||||||
| 2. H1 refers to the flange bolt hole. JSR refers to the button head bolt hole at both ends. ISR refers to the button head bolt hole at one end. JSR18 means that the sphere radius is 18mm . | |||||||||||||
Related Names
Steel Rim Supplier | Custom Made Steel Wheel | Tyre Rim
Scan QR to Read
Links：https://globefindpro.com/products/84923.html
Links：https://globefindpro.com/products/84923.html
Recommended Products
Hot Products
