PE Pipe

PE Pipe

Features
1.Designed with inertmaterial polyethylene, our PE pipe can resist corrosion.  Except for a few strong oxidants, this material can resist many chemical matters.  There is no electron chemical corrosion and it does notneed a corrosion proof layer.   
2 There are no heavy metal additives inour PE pipe for water supply and it is not easily covered with dirt or contaminated bybacterium.  As a result, our pipe is non poisonous.    
3. With thesmooth interior wall, our PE pipe features low friction coefficient and high flux of a fluid.
4. Using thermal fusion or electric fusion for water supply, noleakage of the pipe will occur as the connect point is distorted compared with rubber and other machinery connectpoints.
5. Our PEpipe for water supply possess high ductility. Its extension ration at break cannot exceed500%.  It has a strong ability to fitwith a pipe tank non-uniform settling.
6. Our PE pipe can be coiled with the flexibilityof polyethylene and isused for no pipe tank construction.  The layout PE pipe for watersupply depends on the demand of construction.
7. Our PE pipe features good scratch resistance.
8. Our PEpipes are so tough that they do not rupture if something heavy presses thepipes directly.  
9. Our PE Pipe offers a long service life of more than 50years  
10. With its light weight and friendly operation our PE pipe is convenient forconstruction. 
 

Product Specifications

No.	Spec.
ZCEC-RS-1-1	20
ZCEC-RS-1-2	25
ZCEC-RS-1-3	32
ZCEC-RS-1-4	40
ZCEC-RS-1-5	50
ZCEC-RS-1-6	63
ZCEC-RS-1-7	75
ZCEC-RS-1-8	90
ZCEC-RS-1-9	110
ZCEC-RS-1-10	125
ZCEC-RS-1-11	140
ZCEC-RS-1-12	160
ZCEC-RS-1-13	180
ZCEC-RS-1-14	200
ZCEC-RS-1-15	225
ZCEC-RS-1-16	250
ZCEC-RS-1-17	280
ZCEC-RS-1-18	315
ZCEC-RS-1-19	355
ZCEC-RS-1-20	400

 
Technical Specifications

Name	MPa		Requirements
	PE80	PE100
20℃Hydrostatic strength (100h)	9.0	12.4	No leaks, no failure
80℃Hydrostatic strength (100h)	4.6	5.5	No leaks, no failure
80℃Hydrostatic strength (100h)	4.0	5.0	No leaks, no failure

 

Name		Requirements
Elongation at break		≥350％
Heat reversion(110°C)		≤3％
Min thermal stability(200°C)		≥20min
Resistance to weathering (for blue pipes only) (Multiplied energy of pipe≥3.5GJ/M2 energy resistant to aging	80°CHydrostatic strength (165h)	No leaks, no failure
	Elongation at break shall be met	≥350％
	Thermal stability(200°C)	≥10min

Concern should be shown if a brittle fracture appears in the hydrostaticstrength test (165h) at 80°C. If a test piece fails in a ductile mode in less than 165h, a retest shall beperformed at a lower stress and a new minimum failure time selected from thefollowing table.

PE80		PE100
Failure stress MPa	Failure time h	Failure stress MPa	Failure time h
4.5	219	5.4	233
4.4	283	5.3	332
4.3	394	5.2	476
4.2	533	5.1	688
4.1	727	5.0	1000
4.0	1000

Material
Our PE pipe is made of 100% pure PE80 or PE100 raw material.

Packaging
Standard exporting package is used.

 

Note
The HSDHS code of the PE pipe is 39172100.

Service
We value our clients and will provide advice, guidanceand other help in our effort to be of complete service.  If necessary, we will send our technician to theclient's location and offer further training.  Our clients can contact uson our service line at anytime if they have a problem with our products.

Zhongcai is a major manufacturer of PE pipe, based in China.  We offer various types of products such as PEpipe, hinge, brown PVC profile with laminating filmand so on.  Our products are high qualityand competitively priced.  We can complete the entire process of manufacturing PVC casement profile, PVC window and door,etc. right here in China.  Our lower manufacturing cost can save yourpurchasing cost.  A more detaileddescription of our product is shown on the page.