Extrusion Press (for Φ105mm Rod)

Rod Extruder, Copper Rod Extrusion Press, Brass Extrusion Machinery

This type of rod extruder is a kind of indirect extrusion press. Different from direct extrusion press, a hollow extrusion ram containing the die is applied. While working, copper material is forced to flow through the die in an opposite direction to the ram's motion.

Outstanding Advantages of Indirect Extrusion Press
1. Neither friction nor heat will be generated since there is no relative movement between billet and container.
2. Compared with direct extrusion press, the indirect extrusion press requires 25％~30％ less extrusion force.
3. This rod extrusion equipment can handle profiles with a smaller cross sectional area under lower temperature, at a higher extrusion speed.
4. Uniform brass flow, small extrusion hole and low residual pressure lead to stable mechanical properties of profiles.

Applications
Copper alloy rods or plates extruded by this machine enjoy fine quality and high stability, mostly used in industries like solar energy, electricity generation, circuit protection and more.

Notes
1. Limited by the hollow raw, the applied load cannot exceed a certain range.
2. Limited by the size of die, profiles with complex cross section cannot be processed.