Home Extrusion Press (for Φ195mm Rod)

Extrusion Press (for Φ195mm Rod)

Aluminum Extrusion Equipment, Rod Extruder, Aluminum Rod Extrusion Press


Differing from direct extrusion press, this indirect extrusion machine is especially designed. The die is mounted on the end of a hollow raw and moves into the billet by pushing forward the raw. Finally, well-extruded rods come out of the inner bore.


Characteristics of Aluminum Extrusion Equipment
1. With no relative movement between container and billet, there is no friction or heat while machine working.
2. 25%-30% less extrusion force is needed to complete the same extrusion work.
3. Metal billet with a small cross sectional area can be process with this rod extruder at a low temperature but high speed.
4. Uniform aluminum flow, small extrusion hole and low residual pressure all contribute to consistent and great mechanical performance.

Extrusion Press (for Φ195mm Rod)


Technical Parameters of Aluminum Rod Extrusion Press
Model (Al) Rated pressure (MPa) Size of standard aluminum billet (mm) Max. circumcircle of profile (mm) Max. width of profile (mm) Size of die (mm) Central height of machine (mm) Total power (kW)
Metric ton Short ton
XJ-4500 XJ-5000 25 Φ330×1300 Φ195 195 Φ340×20 2000 950



Applications
Aluminum rods extruded by the machine are most often used as supports, windows & doors frames, accessories profiles, railings, etc.


Notes
1. Limited by the hollow raw, the applied load cannot exceed a certain range.
2. Limited by the size of die, profiles with complex cross section cannot be processed.


Recommended Products
Hot Products