Extrusion Press (for Φ95mm Rod)

Aluminum Rod Extruder, Aluminum Extrusion Machine, Rod Extrusion Press

The indirect extrusion machine is specially manufactured to produce aluminum rods. In indirect extrusion, the billet remains stationary while the die moves into the billet by the hollow raw, through which the backward extrusion take place.

Characteristics of Aluminum Rod Extruder
1. There is no relative movement between billet and container, thus generating no friction or heat.
2. With this indirect extruder, 25%-30% extrusion force will be cut.
3. Profiles with smaller cross sectional area can be extruded by this aluminum rod machine at a lower temperature and a higher speed.
4. Uniform aluminum flow, small extrusion hole and low residual pressure contribute to stable mechanical properties of aluminum rods.

Applications
Aluminum rods and plates by this extrusion machine are widely used in home decoration, office furniture, solar system, etc.

Notes
1. Limited by the hollow raw, the applied load cannot exceed a certain range.
2. Limited by the size of die, profiles with complex cross section cannot be processed.