JK Brand Motor Running Capacitor Series
JK series CBB AC motor run capacitor comes with small size, light weight, small loss tangent, and good self-healing. Its size and weight are only 1/4 and 1/5 of those of the outdated products respectively). It is applicable to the start and operation of 50/60Hz AC single-phase motor, especially suitable for micro pump, baric pump, micro motor, etc.
Features
Small size, reliable electrical performance, self-healing, canned epoxy impregnant structure.
Service Conditions
1. Altitude of the installation and operation area ≤ 2000m
2. Residual voltage at energization ≤ 10% of the rated voltage
3. Pollution: No conductive dust, no corrosive gas, and no inflammable and explosive media in the installation and operation area
4. Operation temperature: -40℃~ 70℃
5. Operation way: Continuous operation
Manufacturing
This self-healing metallized polypropylene film capacitor adopts non inductive winding. The metallized polypropylene film is used as the dielectric medium. The wound capacitor element is sealed by epoxy resin and encapsulated in a self-extinguishing plastic case.
Executions
1. Flat bottom fixing stud M8×12
2. Faston terminals 0.8×6.35, single or double
3. Standard distance P=13.2mm±0.5
4. Unipolar cable, bipolar cable
5. Discharge resistor, plastic cover
Rated voltage | 200VAC, 250VAC, 400VAC, 450VAC, 500VAC |
Rated frequency | 50Hz or 60Hz |
Rated capacitance | 1.0μF-60μF |
AC withstand voltage between terminals | 1.75 times the rated voltage for 2 seconds |
AC withstand voltage between terminal and case | 2000VAC for 2 seconds |
Capacitance tolerance | Cn±5% |
Tangent of loss angle(tgδ) | tgδ≤0.10%(50Hz) |
Maximum permissible voltage | 110% rated voltage |
Maximum permissible current | 130% rated current |
Class of safety protection | P0 (type CBB60, CBB61), P1 (type CBB65) |
Design service life | 3,000 hours (class C) |
Standard | In conformity with GB3667-1997 and IEC60252-1993 |
Related Names
Electric Motor Capacitor | Three Phase Capacitor | Energy Storage Component