Automatic Self-Cleaning Suction Scanning Screen Filter, X Series

The self-cleaning suction scanning screen filter series comes in three variations-the XT vertical, XM horizontal, and XTD-providing a comprehensive filtration system for any application. Each filter utilizes powerful electric suction for cleaning and can be equipped with a filter screen, ranging from 20 to 500 micron, in different diameters from 2" to 24".

Self-Cleaning Suction Scanning Screen Filter, XT Self-Cleaning Suction Scanning Screen Filter, XM Self-Cleaning Suction Scanning Screen Filter, XTD Self-Cleaning Suction Scanning Screen Filter, XMG Filter self-cleaning principle

Water impurities are intercepted by the fine filter screen of the filter and accumulate on the inner surface of the screen, forming a filter cake that traps even the finer impurities. In this way, the dirty water is filtered and the self-cleaning suction scanning screen filter starts a cleaning cycle when the pressure difference between the inlet and outlet of the water reaches a predetermined value.

The cleaning component is crafted from 304 stainless steel, featuring a suction scanner capable of both rotation and vertical movement, as well as multiple suction ports. The suction scanner boasts a 3" electric blowdown valve connected to its interior. This valve can be opened during cleaning, allowing a pressure difference between the internal water pressure and the outside atmosphere to create a vigorous suction force. Consequently, any contaminants are washed out of the scanner and expelled through the blowdown valve. The powerful reverse water flow created at the suction port is capable of effectively removing the difficult-to-get-rid-of contaminants stuck on the filter screen. This suction scanner is propelled by an electric bi-directional motor, which is synced with a screw rod mechanism that sorts out the spiral reciprocating motion, all while maintaining a specific rotational speed. This instrument is outfitted with a collection of suction ports that can effectively vacuum the entirety of the internal filter screen. The entire backwashing procedure typically requires 30-120 seconds while keeping the flow online. Applications
Cooling water treatment: A process that utilizes filtration to reduce sediment accumulation in heat exchangers, thus boosting the cooling power of cooling towers, air conditioning systems and DC systems. In addition, the water filtration keeps the make-up water system in top condition.
Water source treatment: A procedure to obtain clean surface water from rivers, lakes, seas, reservoirs and wells. This technique can remove unwanted particles including sand, bacteria, algae, and organic material.
Industrial circulating water filtration: Employed on equipment that requires specific water quality standards, such as coolers and rolling mills, as well as continuous casting machines, polishing equipment, pumps, electromagnetic valves and ion exchangers, sprayers and radiators. This form of filtration helps eradicate contaminants from the water, preventing blockages that could otherwise occur in pipes, hoses, and other components.
Irrigation: Highly suitable for water sources with high flow and impurities, and can be used for various purposes, such as agricultural irrigation, park sprinkling, golf courses, and sports fields.
The paper industry: efficient white water filtration in its operations. The plastic industry: the filtration and circulation of cooling water to optimize injection processes. Membrane, resin and ultrafiltration pretreatment Seawater desalination systems and mariculture filtration systems with pretreatment filtration. Self-Cleaning Suction Scanning Screen Filter, XT Installation: vertical installation Flow rate (single filter): 15-1800 m³/h; larger flow can be obtained by connecting multiple units in parallel. Nominal pressure: 1.0 MPa, 1.6 MPa Operating pressure: 0.20-1.2 MPa Maximum operating temperature: 60 ℃ Filtration degree: 50-800 micron Control mode: differential pressure/timing/manual Cleaning time: 25-120 s Cleaning mechanism speed: 14-20 rpm Cleaning method: suction scanning cleaning. Cleaning pressure loss: 0.01-0.08 MPa Operating voltage: AC 380V, 50Hz, three-phase four-wire Control voltage: AC 220V, 50Hz LCD display interface, user-friendly design, easy operation Request a Quote Technical Specifications

Model	XT-150	XT-200	XT-250	XT-300	XT-350	XT-400	XT-500
Inlet/outlet connection (mm)	150	200	250	300	350	400	500
Max. flow rate (m³/h)	150	300	400	600	900	1200	1800
Filtration area (cm²)	6500	6500	11500	12500	13500	16500	16500
Electric drain valve DN (mm)	50	50	80	80	80	80	80
Water consumption per cycle (L)	150	150	400	400	400	450	450
Motor power (kW)	0.55	0.55	0.55	0.55	0.55	0.55	0.55
Approx. weight (kg)	500	500	620	655	720	910	980

The flow accuracy in the table is 200 μm. For other technical parameters, please consult Xuyang for details.

Installation Dimensions

Model	XT-150	XT-200	XT-250	XT-300	XT-350	XT-400	XT-500
H	580	600	720	720	700	800	800
H1	1100	1120	1413	1413	1417	1525	1525
H2	1720	1750	2080	2080	2110	16500	2200
L	880	900	1000	1000	1200	1500	1600
L1	350	350	415	415	475	565	565

Self-Cleaning Suction Scanning Screen Filter, XM Installation: horizontal installation Flow rate (single filter): 20-1200 m³/h (larger flow can be obtained by connecting multiple units in parallel) Nominal pressure: 1.0 MPa, 1.6 MPa Operating pressure: 0.20-1.2 MPa Maximum operating temperature: 60 ℃ Filtration degree: 50-800 micron Control mode: differential pressure/timing/manual Cleaning time: 35-120 s Cleaning mechanism speed: 14-20 rpm Cleaning method: suction scanning cleaning. Cleaning pressure loss: 0.01-0.08 MPa Operating voltage: AC 380V, 50Hz, three-phase four-wire Control voltage: AC 220V, 50Hz LCD display interface, user-friendly design, easy operation Request a Quote Technical Specifications

Model	XM-50	XM-80	XM-100	XM-150	XM-200	XM-250	XM-300	XM-350
Inlet/outlet connection (mm)	50	80	80	150	200	250	300	350
Max. flow rate (m³/h)	100	100	150	200	300	400	600	900
Filtration area (cm²)	1750	1750	3200	3200	6500	11500	12500	13500
Electric drain valve DN (mm)	50	50	50	50	50	80	80	80
Water consumption per cycle (L)	150	150	150	150	150	400	400	400
Motor power (kW)	0.55	0.55	0.55	0.55	0.55	0.75	0.55	0.75
Approx. weight (kg)	120	130	180	210	480	710	780	830

The flow accuracy in the table is 200 μm. For other technical parameters, please consult Xuyang for details.

Installation Dimensions

Model	XM-50	XM-80	XM-100	XM-150	XM-200	XM-250	XM-300	XM-350
A	260	260	260	345	345	415	415	470
A1	230	230	260	345	345	372	372	400
B	360	360	620	700	700	900	900	950
C	830	830	800	1050	1100	1120	1070	1150
C1	300	300	250	350	300	385	345	510
L	500	500	800	900	900	1200	1200	1200
L1	400	400	400	450	450	500	500	500

Self-Cleaning Suction Scanning Screen Filter, XTD Installation: vertical installation Flow rate (single filter): 1200-3500 m³/h (larger flow can be obtained by connecting multiple units in parallel) Nominal pressure: 1.0 MPa Operating pressure: 0.20-0.60MPa Maximum operating temperature: 60 ℃ Filtration degree: 50-800 micron Control mode: differential pressure/timing/manual Cleaning time: 35-500 s Cleaning mechanism speed: 14-20 rpm Cleaning method: suction scanning cleaning. Cleaning pressure loss: 0.01-0.08 MPa Operating voltage: AC 380V, 50Hz, three-phase four-wire Control voltage: AC 220V, 50Hz LCD display interface, user-friendly design, easy operation Request a Quote Technical Specifications

Model	XTD-500	XTD-600	XTD-700
Inlet/outlet connection (mm)	500	600	700
Max. flow rate (m³/h)	2000	3000	4000
Filtration area (cm²)	13500X4	13500X4	13500X4
Electric drain valve DN (mm)	80-4	80-4	80-4
Water consumption per cycle (L)	400-4	400-4	400-4
Motor power (kW)	0.75-4	0.75-4	0.75-4
Approx. weight (kg)	1300	1400	1500

The flow accuracy in the table is 300 μm. For other technical parameters, please consult Xuyang for details.

Self-Cleaning Suction Scanning Screen Filter, XMG (High Pressure Cleaning) Installation: horizontal installation Flow rate (single filter): 20-1200 m³/h (larger flow can be obtained by connecting multiple units in parallel) Nominal pressure: 1.0 MPa Operating pressure: 0.20-0.60 MPa Maximum operating temperature: 60 ℃ Filtration degree: 20-500 micron Control mode: differential pressure/timing/manual Cleaning time: 35-120 s Cleaning mechanism speed: 14-20 rpm Cleaning method: suction scanning with high pressure water flushing cleaning Cleaning pressure loss: 0.01-0.08 MPa Operating voltage: AC 380V, 50Hz, three-phase four-wire Control voltage: AC 220V, 50Hz LCD display interface, user-friendly design, easy operation Request a Quote Technical Specifications

Model	XMG-150	XM-200	XMG-250	XMG-300	XMG-350	XMG-400
Inlet/outlet connection (mm)	150	200	250	300	350	400
Max. flow rate (m³/h)	200	300	400	600	900	1200
Filtration area (cm²)	6500	6500	11500	13500	13500	16500
Electric drain valve DN (mm)	50	50	80	80	80	80
Water consumption per cycle (L)	150	150	400	400	400	450
Motor power (kW)	0.55	0.55	0.75	0.55	0.75	0.75
Auxiliary flushing pump power (kW)	2.2	2.2	2.2	2.2	3.0	3.0
Approx. weight (kg)	500	550	610	680	700	760

The flow accuracy in the table is 200 μm. For other technical parameters, please consult Xuyang for details.

Control System Industrial single-chip PLC for an automatic control experience with a Chinese or English interface. A range of control options for the automated filter cleaning, including pressure differential and set timers. Manual and forced cleaning operations are available. Adjust filtering and cleaning times right at the location. This filter offers a range of outputs for operation, cleaning, and fault signals, as well as a 485 communication interface. Electric self-cleaning suction scanning screen filter Filter shell material: carbon steel covered with epoxy resin powder, stainless steel, duplex steel Screen filter material: stainless steel, duplex steel Self-cleaning device: stainless steel, duplex steel Blowdown valve: cast iron Seal ring: nitrile rubber and silicone rubber. Control box: PVC