RF Connector Mold

RF Connector Mold

Our RF connector mold is used to produce parts that are applicable to the radio frequency connector with the model number of IPEX 20279-001E, 20314-001E and HRS U.FL-R-SMT. The molded product is widely used in electronic devices and modules that need RF transmission, such as smart mobile phone, mobile internet device (MID), GPS navigation device, wireless module, mini PCI module, PDA, game console and Bluetooth device.

Product Information

Specifications of RF Connector Mold

1.  General Specification                     

1.1 Voltage: 60VAC (R.M.S)       

1.2 Frequency: 0～6GHz               

1.3 Characteristic Impendence: 50Ω                   

1.4 Working Environment Temperature: -40℃～ 90℃

1.5 Working Environment Humidity: 90% MAX

2. Electrical Specification 

2.1 Insulation Resistance: 500MΩ　

2.2 Withstand Voltage: 200V AC 1Min

2.3 Contact Resistance: Inner conductor 20 mΩ max; External conductor 10 mΩ max

3. Mechanical Specification 

3.1 Mechanical Lifetime: 30 times plug

3.2 Retentivity of Center Contact: 0.15N min (measured by dia 0.475mm gauge)

3.3 Acceleration: 735m/s2, 11ms; wave: half sin; 6 cycles per each 3 axis 

3.4 Vibration Frequency: 10-100Hz; One way scope: 1.5mm; Acceleration: 59m/s2; 5 cycles per each 3 axis

4. Environmental Specification 

4.1 Steady in: 40℃; Humidity 95% RH for 96 hours

4.2 Salt Fog: 35℃ Concentration: 5% Time: 48 hours 

Technical Requirements

1. The key dimensional precision of tooling is ±2μm.

2. This insert molding comes with three separate parts, with the precision of movement no more than 0.02mm.

3. The precision of auto cutting is less than or equal to 0.2mm.

4. The length of welding feet is 0.25mm.

5. The precision of shell gap shall be controlled within 0.03mm.

Our R&D staffs have made plenty of improvements based on the existing design. These improvements were certified with patents. Through their continuous efforts, the molded product achieves high stability and long service life and comes with an output of 10 million pieces per month.