QY3.2DT, QY4DT Dual Cylinder 2 Post Lift with Floor Plate

Description of Dual Cylinder 2 Post Lift with Floor Plate
The QY3.2DT and QY4DT belong to the 2 post lift equipped with a double heavy-duty hydraulic cylinder and a floor plate. Due to the overall height of 2826mm, this two-post lifting system can be installed in nearly all the professional or residential garages with low ceilings.

The 2 post lift adopts a dual point lock release system.

Features of Dual Cylinder 2 Post Lift with Floor Plate
1. Driving Mode
Chain-over roller driving mode

2. Lock Release Mode
Dual point lock release system

3. Arm Assembly
1) Standard offset (asymmetric) arm design
When the QY4MT(A) single cylinder 2 post lift is raising a vehicle, its front arms are near the front wheels of the vehicle and the rear arms are close to rear wheels. Since the front arm is shorter than the rear arm, the vehicle's center of gravity will be moved towards the center of posts, which helps to improve safety.

2) Drop-in type lifting pads, including truck adapters
A drop-in lifting pad contains sleeves of different heights. The operator can change the sleeve according to the height of a vehicle chassis. The pad comes with labor saving and easy operation. However, it sometimes fails to touch the chassis.

A screw lifting pad owns a screw inserted into a loading arm. The operator may turn the screw to adjust the pad height in line with the chassis height of a vehicle. The pad is capable of touching the chassis through laborious adjustment.
Different from many like products only fitted with drop-in lifting pads or screw lifting pads, our 2 post lift employs the combination of drop-in and screw lifting pads, namely, the screw lifting pad with a 70mm-high sleeve. The operator can insert the sleeve into a loading arm, put the screw pad into the sleeve, and then turn the screw in order to make the pad touch the chassis.

4. Safety Mechanism
1) Automatic arm lock restraints
2) Door guard protection rubber
3) Its up-limit switch can make sure the working stroke of cylinders is in a safe length scope.
4) This two post car lift employs a heavy-duty steel cable with the diameter of 9.5mm and the cable pulley with 120mm diameter, so as to make synchronization process smoother and stronger.
5) Ultra-high molecular nylon sliding blocks realize self lubrication, which helps to put vehicles up and down smoothly.
6) Overload safety valve
7) The 2 post lift puts a safety valve to use, so as to prevent a sudden loss of pressure.
8) Including anchor bolts

5. Control System
1) Push the "UP" button on the motor for lifting.
2) Push the "DOWN" lever on the pump for lowering.