QY4DT(A) Dual Cylinder 2 Post Lift with Base Plate

Description of Dual Cylinder 2 Post Lift with Base Plate

Equipped with a double heavy-duty hydraulic cylinder, the QY4DT(A) 2 post lift applies a reinforced base plate functioning as a powerful support for posts. Since it is 2760mm high, this two post vehicle lift is suitable for nearly all the professional or residential garages with low ceilings.

The 2 post lift makes use of a dual point lock release system.

Features of Dual Cylinder 2 Post Lift with Base Plate
1. Driving Mode
Chain-over roller driving mode

2. Lock Release Mode
Dual point lock release system

3. Arm Assembly
1) Standard offset (asymmetric) arm design
When the QY4DT(A) single cylinder 2 post lift is raising a vehicle, its front arms are near the front wheels of the vehicle and the rear arms are close to rear wheels. Since the front arm is shorter than the rear arm, the vehicle's center of gravity will be moved towards the center of posts, which helps to improve safety.

2) Combination of drop-in and screw lifting pads
A drop-in lifting pad contains sleeves of different heights. The operator can change the sleeve according to the height of a vehicle chassis. The pad comes with labor saving and easy operation. However, it sometimes fails to touch the chassis.
A screw lifting pad owns a screw inserted into a loading arm. The operator may turn the screw to adjust the pad height in line with the chassis height of a vehicle. The pad is capable of touching the chassis through laborious adjustment.
Different from many like products only fitted with drop-in lifting pads or screw lifting pads, our 2 post lift employs the combination of drop-in and screw lifting pads, namely, the screw lifting pad with a 70mm-high sleeve. The operator can insert the sleeve into a loading arm, put the screw pad into the sleeve, and then turn the screw in order to make the pad touch the chassis.

4. Safety Mechanism
1) Automatic arm lock restraints
2) Door guard protection rubber
3) To limit the working stroke of cylinders within a safe length scope, the 2 post lift applies an up-limit switch.
4) Its heavy-duty 8mm-diameter steel cable and 100mm-diameter cable pulley make synchronization process smoother and securer.
5) To ensure the solidness of 2-post auto lift, its base plate shares some force on the posts.
6) The ultra-high molecular nylon sliding blocks comes with self lubrication, which contributes to smooth lifting and lowering.
7) Overload safety valve
8) A safety valve is applied to guard against an unexpected loss of pressure.
9) Anchor bolts

5. Control System
1) Push the "UP" button on the motor to lift a car.
2) Move the "DOWN" lever on the pump to lower the car.