EN 10255 Steel Tube for Welding and Threading

Send Message Request a Quote

In strict accordance with EN10255 standard, our hot rolled steel tube is ideal for welding and threading. The steel gas pipe is widely used for water and gas distribution. The tubular product can receive cold bending and galvanizing treatment, if required. The steel tube supports immediate installation.

EN 10255 Steel Tube for Welding and Threading

Parameters
1. Standard: EN 10255
2. Steel grade: S195T
3. Delivery condition: Normalizing
4. Outer diameter: 70MM-610MM
5. Wall thickness: 6MM-35MM
6. Tolerance: EN 10255 standard
7. Length: Customization
8. Certificate: EN 10204/3.1

Delivery Condition

Steel grade	Delivery condition
S195T	Normalizing
Usually, the steel pipe belongs to a bare pipe with flat ends. The cut surface of the end is perpendicular to the tube axis, with few burrs.

Chemical Composition (Heat Analysis)%

Steel grade	C	Mn	P	S
Steel grade	Max.	Max.	Max.	Max.
S195T	0.20	1.40	0.035	0.030

Mechanical Property

Steel grade	Min. yield strength (Mpa)	Min. Tensile strength (Mpa)	Min. elongation (%)
			I
S195T	195	320-520	20