Double Sided T10 LED Tube for Advertising Board

The double sided T10 LED tube designed for advertising board is able to emit light rays with a 240 degrees angle of coverage. It can illuminate the front and back of a light box or advertising board at the same time, make them more attractive.

Application
The LED tube is suitable for illuminating advertising boards and light boxes.

Features
1. Light Rays from Two Sides
The LED tube emits light rays from two sides, and has a 240 degrees angle of coverage. It can light up an object both from the front and back.
2. High Luminous Efficiency
Its luminous efficiency is 99LM/W. It consumes 75% less of energy than incandescent lights and 45% less than fluorescent lights.
3. Long Lifespan
Advanced encapsulation technology ensures its quality. The product can be used for 30,000 hours.
4. Healthy Light
It works without stroboflash or unacceptable glare.
5. Uniform Direction
The emitted light rays are in uniform direction, hence are easy to control and can be utilized with high efficiency.
6. Green Light
The product is green because it works with no UV, infrared, thermal radiation or mercury.
7. High Color Rendering Index
High color rendering index gives you a real and clear view. Color temperature is adjustable.
8. High Power Factor
Contributed by an innovative power supply circuit, the power factor of the product is higher than 0.95, effectively protecting the grid.
9. High Stability
It is equipped with internal thermal protection system as well as constant-current circuit, which protect it from fluctuating voltage.
10. Good Quality
The product has passed certification including CE, ROHS, PSE, FCC, etc. and is warranted for 3 to 5 years.

Specification
Working temperature, -25℃-45℃
Working voltage, AC/DC24V, DC12V, AC 90-264V
LED lamp, 3528SMD
The product can be manufactured according to special requirements from customers.

Installation
The two spins at each end of the light tube are connected with a copper strip connected to the drive circuit inside. The LED tube can be installed in many places. However, it cannot work with ballasts, lamp starters, or compensation capacitors. Remove these elements before installing the product in an existing circuit. To install the product, connect its two ends to L-AC and N-AC in any order, as shown in the following figure.

Note
1. Turn off the power supply before installation.
2. Keep away from water and be careful of electricity.
3. Ensure that you are using the required voltage.
4. Before installing the product to an old bracket for T8 fluorescent lights, remove the old ballast, lamp starter, and compensation capacitor.
5. Read the instruction book carefully before installation.

25 units of the LED tube are stored in a 7-layer corrugated paper box.

Related Names
LED Showcase Lighting | Under Cabinet Tube Light | Commercial LED Light