High Voltage T5 LED Tube with Internal Power Supply (AC110/220V)

The high voltage T5 LED tube with internal power supply (AC110/220V) is an amazing product in the LED industry and adopts imported chips and major accessories. It was born as the first-ever high voltage T5 LED light with internal power supply in the world after years of research and experiment.

These researches and experiments are performed by our technical team consisting of professionals owing doctor’s degree, and many domestic and foreign experts in LED industry including outstanding LED designers from Japan and Germany. It has a small size, good heat dissipation, and a lifespan of over 50,000 hours. Its power factor is above 0.9, highly appreciated by industrial experts for its energy efficiency.

It has been certified by the CE, ROHS, PSE, and FCC certifications, and is produced with fine workmanship, ensuring its reliability. Moreover, we warrant the product for 3 to 5 years and promise to compensate two new ones for you if you have purchased a faulty light tube.

Application
The LED tube can be used for substituting old T5 fluorescent lights that rely on calcium halo phosphate and trichromatic phosphors. It is perfectly suitable for residential buildings, offices, workshops, hospitals, schools, and supermarkets.

Advantages
1. Good Heat Dissipation
The case manufactured from aluminum and polycarbonate has good heat dissipation and luxurious appearance.
2. Multiple Electrical Supply
It can be powered by AC90-132V or AC200-264V, and is applicable in Europe and the Americas.
3. High Luminous Efficiency
The luminous efficiency is as high as 104LM/W, enabling the product to save more than 70% of energy comparing with normal daylight lamps, and 50% comparing with fluorescent lights.
4. Long Lifespan
The 3528 LED lamps use 9*26 mil or 10*23 mil chips, and have fine heat dissipation as well as a lifespan of over 50,000 hours. The product can be used for 50,000 hours, longer than the T8 light tube.
5. High Power Factor
It has a power factor higher than 0.9.
6. High Electrical Insulation
It has a high insulation and can bear voltage higher than the T8 light tube. Its insulation performance is class 2 according to Chinese insulation standards.
7. Small Size
It is small and compact by virtue of the internal power supply and has wider application than the T8 light tube.
8. No Stroboflash or Noise
It has a quick startup, has no stroboflash or noise.
9. Small Light Attenuation
The average annual light attenuation is smaller than 5%.
10. High Stability
It will not be influenced by unstable voltage because of the constant-current circuit and internal thermal protection system.

Specification
Working temperature, -25℃-45℃
Working voltage, AC230V, AC110V
The LED tube can be designed and manufactured according to your requirements.

1. Keep the pins at the two ends of the LED tube perpendicular with the floor, and then push the light tube toward the bracket along the slots on the bracket until the it gets fastened.
2. Rotate the light tube to make the mask face toward the floor.

Note
1. Ensure that the electric power has been cut off before the installation.
2. Be careful with water and electricity.
3. Ensure that the light tube uses a voltage in the range of the working voltage.
4. If you want to use the old bracket for T5 fluorescent lights, remove the old ballast, lamp starter, and compensation capacitor.
5. Read the instruction book carefully before installation.

The box is made of 5 layer of corrugated paper and each box contains 30 pieces of the LED tube.

Related Names
LED Ceiling Tube Light | High Power LED Light | T5 Tube Lighting Fixture