Solar Collector for Split Solar Water Heating System

Send Message Request a Quote

Split Solar Water Heating System

A solar collector for split solar water heating system is specially designed for urban high rise residence. It can be separated from the water tank to compose a split solar water heater for use. In comparison with other heaters, our product can be flexibly installed on the housetop, skylight, balcony or wall. It is not restricted on its mounting position and can perfectly combine with the building.

This solar collector has made up numerous defects of traditional products. For instance, the conventional product has not enough installation area due to the high storey. At the same time, our product can effectively save cold water, reduce the risk of pipe bursting or leakage, and so on. With concise modeling, smooth line and fashionable style, it is an ideal choice of modern top grade residence.

Main Specifications

Manifold	Material	Aluminum
	Thickness	2mm
	Insulation	Rock wool
Vacuum Tube	Material	High borosilicate glass
	Thickness	1.6-2.0mm
	Diameter	58mm
	Length	900mm
	Hail Resistance	28mm
Heat Pipe	Material	Oxygen free red copper
Seal Ring	Material	Silicone rubber
Frame	Material	Aluminum
Frame	Thickness	2.5mm

Technical Parameters

Model	Product Size (mm) (L×W×H)	Lighting (m2)	Supply Hot Water(L/℃)	Qty. per 20’ / 40’Container
Model	Product Size (mm) (L×W×H)	Lighting (m2)	Supply Hot Water(L/℃)	Qty. per 20’ / 40’Container
SPV-H1500/47-20	3290×840×130	2.0	120/60	125	242
SPV-H1500/47-24	3290×980×130	2.55	150/60	110	205
SPV-H1500/47-30	3290×1190×130	3.1	180/60	85	160

Our solar collector can be combined harmoniously with architecture. Also, it features free maintenance. This product is suitable for mains pressure water with the pressure of up to 0.6MPa. The tube inside our product contains no water, so it never bursts or furs up. This tube can provide ultra high heat conduction. Our copper heat pipe can be used for rapid heat transfer. With different quantity of vacuum tube, our product can be assembled with a water tank of different capacity. It can be installed in either a single house or a commercial building with a centralized hot water system. Also, it is optimized for both installation and operation through the integrated and modularized design.

Product Characteristics

Frame of solar collector for split solar water heating system is made of high quality aluminum material, providing such advantages as light weight, high strength, corrosion resistance and some others. Its performance is safe and reliable. There is no risk of bursting, sliding or falling pipe. In accordance with the actual area of the balcony, the size of the collector can be flexibly customized so as to fully make use of the solar energy. Thanks to the advanced welding technique on its back, the heat absorbing coating will not be damaged. Our product can also provide long lifespan and high efficiency of thermal collection.

Solar Collector for Split Solar Water Heating System

Scan QR to Read
Links：https://globefindpro.com/products/87753.html