The high-speed car wash system (CF-370) is one of our high-end types of the rollover car wash systems. After over 3 years of research and development, Risense has launched this car wash system with tire brushes to satisfy the higher requirements of some customers. The high-speed car wash machine can rinse different parts of the vehicle at one time, and hence save time and resources.
Parameters Advantages Details Configurations ParametersModel | CF-370 |
Dimension | L*W*H: 2.51m×3.6m×3.15m |
Rail length: 9.5m rail distance 3.3m wash arm height: 3.15m | |
Assembling Range | L*W*H:11m×3.7m×3.3m |
L*W*H:10.5m×4.6m×3.3m | |
Moving Range | L*W: 10000mm×3700mm |
Voltage | Voltage: AC380V 50Hz Capacitance: 20KVA |
Water Supply | DN25mm water flow rate≥80L/min |
Air Pressure | 0.75~0.9Mpa(7.5~9.0kgf/cm2)air flow rate≥0.1m3/min |
Ground Flatness | Deviation≤10mm |
Applicable Vehicles | Sedan/jeep/minibus within 10 seats |
Applicable Car Dimension | L*W*H: 5.4m×2.1m×2.1m |
Washing Time | 1 rollover 2'45'' /2 rollover 4'15''(for a 4.8m-long car) |
Risense’s rollover car wash machine CF-370 adopts the advanced bearing technology that shortens the distance between the top brush and the top air outlet. The length of the car wash machine is as short as 1.5 meters, which increases the spatial efficiency. The CF-370 is thus suitable for various sites.
Air dyer systemThe air dryer system comprised of 4 air compressors and 4 outlets is effective to dry cars. Turned V-shaped side blow can increase the use ratio of air power as it reduces air offset.
Photoelectric sensorThe air dryer system is equipped with 3 pairs of photoelectric sensors that can identify the car body shape and keep air outlets 10cm away from the car. The design well protects customers’ cars.
Height limit deviceThe height limit device will stop the machine if cars touch it, which increases the safety of car washing process.
Side brushes and wheel brushes of Risense’s rollover car wash machine CF-370 are respectively made of cloth brushes and 4th generation of swallow-tailed sawtooth foam brushes. The combination of cloth and foam brushes performs well in terms of cleanness, quietness, durability, softness and safety, especially the foam brushes feature great capacity to retain water and reduce noise, which greatly improves user experience.
Wheel brushesPneumatic wheel brushes are made of nylons and they can wash deep into recesses and wheel rims.
Brushes tilting technologyBrushes smartly adapt to the car body shape in the tilted position to effectively clean car sides and the rears.
Risense’s rollover car wash machine CF-370 collects car exterior information with the use of raster scanning before a car enters the machine. Motion of top brushes will be processed and calculated by PLC and thus is stable and immune to external factors. The smart safety system comprised of photoelectric censors and touch censors guarantee the safety and stability of the whole car washing process.
ConfigurationsStandard Devices | Optional Devices |
Shampoo spray system | High-pressure water devices |
Water wax spray system | water-repellent protective coating with high gloss finish |
Contour-following drying system | Undercarriage wash system |
Telescopic tire brushes | High-pressure prewashing water guns |
Equipment data intellectualization | |
Self-diagnose system |