Tunnel Car Wash Equipment CC-670 (7-Brush)

This tunnel car wash system has 7 car brushes: 1 vertical lift overhead brush, 2 large vertical brushes and 4 small vertical brushes. This car wash system features a PLC automatic computer control system, which is known for its security and washing efficiency. A one-click was method is also available. For more information, please see the tunnel car wash system parameters below.

Parameters Advantages Details Configurations Parameters

Model	CC-670
Dimension	L*W*H: 8m×3.8m×3.44m
	Conveyor 9.96m (including car wheel guide devices)
Assembling Range	L*W: 10240mm×3800mm
Voltage	AC380V50Hz (5 wire system)
Water Supply	DN25mm water flow rate≥200L/min
Air Pressure	0.75～0.9Mpa/air flow rate≥0.1m³/min
Ground Flatness	Deviation≤10mm
Applicable Vehicles	Sedan/jeep/minibus within 10 seats
Applicable Car Dimension	L*W*H: 5.2m×2.15m×2.2m (wheelbase≤3.2m)
Washing Efficiency	55-60 cars/h
Small Vertical Brush	2
Large Vertical Brush	2
Overhead Brush	1
Water Consumption	95-140L/car
Power Consumption	0.6kwh/car
Shampoo Consumption	7ml/car
Water Wax Consumption	12ml/car

Advantages The galvanized frame of this tunnel car wash system is both solid and durable. The high pressure washing system improves the washing performance. The foam and water wax proportioning system is easy to use. Automatic conveyor. The liquid automatic siphon is easy to operate. Multiple cleaning and long term wash processes rinse the car completely and ensure an outstanding washing performance. The PLC fully-automatic computer control system ensures a higher security. The one-click washing method is easy to operate. A contour-following drying system creates a better drying performance. Details
Non-welded hot-dipped galvanized steel frame
SITI Motor
Air dryer Foam brushes After years of research and development, 4th generation of swallow-tailed foam brushes contain an appropriate proportion of rubber and thus prevent potential risks. Foam brushes have great capacity to retain water, which incredibly improves the washing effect.

The conveyors automatically move the car to complete the whole process from pre-soak rinse to air drying. Tunnel car wash equipment CC-670 (7-Brush) can continuously clean cars.

Features Easy to manage; Various combinations of car wash methods; High efficiency: wash 45 to 55 cars per hour. Low energy consumption: on average, it consumes 150 L of water and 0.6 kWh of electricity per car. Control panel Being enclosed Water proofing Long life of the circuit board Conveyors Suitable for various types of cars Equipped with P209 pillow block bearing Long service life Convenient to maintain Dryers Integral top dryers on both sides High-pressure air drying effect Move vertically to adapt to various cars Signals at the entrance Red cross and green arrow signal light Easy to notice Width Tunnel car wash equipment CC-670 is 3.8 meters in width 2.2 meters for car wash is much safer Configurations

Standard Devices	Optional Devices
Hot dip galvanized frame	Undercarriage wash system
Shampoo spray system	High-pressure water devices
Water wax spray system
Contour-following drying system
Car entry guide rail apparatus
Equipment data intellectualization
Self-diagnose system