Drive Through Bus Wash System (5-Brush)

The drive through bus wash system with 5 brushes (CB-750) features a PLC fully-automatic computer system to improve the security and high pressure water system, which increases the washing speed. The bus system washes both buses and trucks using 4 lateral brushes and 1 overhead brush. Further details are shown in the table below.

Parameters Advantages Details Configurations Parameters

Model	CB-750
Dimension	L*W*H: 7210mm×5400mm×5500mm
Assembling Range	L*W: 8000×6000mm
Air pressure	0.75~0.9MPa（7.5~9kg/cm²）
Voltage	AC three-phase four-wire system Voltage AC380V50Hz
Water supply	DN25mm water flow rate≥120L/min
Ground flatness	Deviation≤10mm
Washing method	Drive through
Applicable Vehicles	Container truck, box truck, bus
Applicable Car Dimension	L (no limit) W≤3000mm H=3250mm
	L (no limit) W≤3000mm H=4400mm
Washing Time	15-30 cars/h
Water consumption	180-240L/car

Advantages The fully automatic PLC electronic control system improves the security. A high pressure water system increases the washing speed. The galvanized frame is extremely corrosion resistant. A built in self-diagnosing system automatically detects and removes mechanical obstacles during the washing process. Details
PLC system
SITI motor for brushes
Touch screen
Foam brushes
Undercarriage wash system
Pre-wash gantry
Motor for brushes

SITI motor performs well in terms of water-proofing and service life.

Foam/nylon brushes

5 brushes of Risense’s bus wash system are made of imported 4th generation of foam or nylons. They thus have the advantage of softness, gentleness and cleanness. Its capacity to retain water optimizes the washing performance.

Configurations

Standard Devices

Lateral brush motor

Overhead brush motor

Water pump

Drive motor

Equipment data intellectualization

Self-diagnose system