WDW-T Series Computerized Electronic Universal Testing Machine

Send Message Request a Quote

1. Equipment Usage
The WDW-T series computerized electronic universal testing machine adopts floor type. It can conduct tensile, compression, bend, shear, peel, tear and other tests on rubber, plastics, electric wires, composite materials, metal bars and other metallic or non-metallic materials.

2. Main Technical Parameters of Computerized Electronic Universal Testing Machine

Model \| Specification		WDW-T50	WDW-T100	WDW-T200	WDW-T300	WDW-T600
Measurement range of testing force (kN)		0.1 ~50	0.2 ~100	0.4 ~200	0.6 ~300	1.2 ~600
Accuracy class of testing machine		Class 1 or 0.5
Resolution rate of test force		1/300000 of maximum test force; the whole process applies the same gear, or falls into 7 gears according to your needs
Relative error of displacement		≤0.5% indicating value
Measurement resolution of displacement (υm)		0.03
Minimum reading value of displacement (mm)		0.001
Measurement resolution of beam displacement (mm)		≥0.001
Speed range of beam		0.001mm /min ~500mm /min, stepless speed regulation, setting freely
Measurement accuracy of deformation		≤±0.5%
Measurement range of deformation		2%~100%
Test space of valid tensile (mm)		650	50	680	600	430
Space of compression test (mm)		1000	1000	1480	1100	530
Width of test space (mm)		560	560	580	650	650
Jaw size (mm)	Clamp thickness of flat sample (mm)	0 ~14	0 ~14	0 ~20	0 ~20	0 ~20
	Clamp diameter of round sample (mm)	φ4 ~φ22	φ4 ~φ22	φ9 ~φ26	φ9 ~φ26	φ9 ~φ26
Supply voltage		380V ±10% , 50Hz
Working environment		Room temperature~30℃, relative humidity≤80%
Main parts		Imported AC servomotor and speed governing system
Main engine dimension (mm)		1020 ×800 ×2180		1020 ×800 ×2180		1090 ×820 ×2560
Weight (kg)		1100		2000		3000

3. Functions and Characteristics of Electronic Universal Testing Machine
1) Main Engine
a) Equipped with the imported all-digital AC servo speed governing system, servomotor and load cell, it can realize high-precision measure with wide range and three-closed-loop control.
b) Using the precise ball screw and retarding mechanism makes drive smooth, steady and gapless with less noise.

2) Measurement and Control System
a) It uses imported electronic components and complete digital design.
b) The system conforms to PCI2.1 bus standard. The microcomputer possesses the automatic identification and installation function, which enables the computerized electronic universal testing machine to carry out tests as soon as you insert a controller card into the computer.

3) Test Software
The software is provided with several control modes, such as constant force, constant displacement, constant deformation and stored program control. In the testing process, it will show a variety of test curves in real time, like force-displacement, force-time and force-deformation. These curve graphs may automatically switch at all times, which helps you to easily observe and compare. In addition, it is able to calculate various routine data automatically, including tensile strength, yield strength, breaking strength, elastic modulus and specified non-proportional extension strength RP0.2. The testing process control and data processing comply with the national standards of corresponding materials.

WDW-T Series Computerized Electronic Universal Testing Machine

Related Names
Universal Tester | Tensile Test Apparatus | Fatigue Testing Machine

Scan QR to Read
Links：https://globefindpro.com/products/61746.html